Scania fault code 1062

EMS Engine Management System Exhaust gas temperature sensor upstream of SCR catalytic converter T113 Implausible signal on T158 3, Temperature sensor downstream of particulate filter. The value is lower than the calculated temperature. Read explanation → EMD Exhaust gas temperature sensor upstream of SCR catalytic converter T113 Implausible signal from the exhaust gas temperature sensor upstream of the SCR catalytic converter. The value is lower than the calculated temperature. Read explanation → EME Temperature sensor, temperature is too low Implausible value from the exhaust gas temperature sensor upstream of SCR catalytic converter T158. The value is lower than the calculated temperature. Implausible value from the e… Read explanation → EMO Exhaust gas temperature sensor upstream of SCR catalytic converter T113 Exhaust gas temperature sensors before the SCR catalyst (T158) signal is not plausible. The value is much lower than the calculated temperatureExhaust gas temperature sensors befor… Read explanation → VDT Internal fault Invalid configuration. Read explanation → COO Coordinator Coordinator. Internal fault in coordinator. Read explanation → MBS # not needed, Engin Speed signal error Functionalitis dependant on this information might be degraded. E.g: Circulation pump is not running with incorrect speed. Read explanation → DAS Short-range radar, right-hand side Overvoltage to the short-range radar has been detected. Read explanation → TCC Automatic fire alarm system, voltage supply, short circuit The control unit has interpreted that there is a short circuit in the voltage supply to the automatic fire alarm system. Read explanation →