Scania ALLISON fault codes

Showing 121–180 of 313 codes

• 10131hex 2793 Gear selector position information, incorrect PWM signal
• 10248hex 2808 Solenoid PCS6 jammed in the disengaged position (7-speed gearboxes only)
• 10249hex 2809 Solenoid PCS6 jammed in the ON position (7-speed gearboxes only)
• 10258hex 2812 Solenoid PCS6, open circuit (7-speed gearboxes only)
• 10259hex 2813 Solenoid PCS6, interference (only 7 speed gearboxes)
• 10260hex 2814 Solenoid PCS6, short circuit to ground (7-speed gearboxes only)
• 10261hex 2815 Solenoid PCS6, short circuit to battery (7-speed gearboxes only)
• 21266hex 5312 Sensor for retarder request, incorrectly low
• 21267hex 5313 Sensor for retarder request, incorrectly high
• 49153hex C001 CAN2, communication error
• 49168hex C010 CAN1 (J1939), communication error
• 49408hex C100 Lost communication with the engine management system (J1587)
• 49411hex C103 Lost communication with drive mode selector 1
• 49429hex C115 Lost communication with the engine management system (J1939)
• 49809hex C291 Lost communication with drive mode selector 2
• 49924hex C304 Incompatible primary drive mode selector
• 49971hex C333 Incompatible secondary drive mode selector
• 50176hex C400 Incorrect communication data received
• 50177hex C401 Incorrect data received from engine management system via CAN2
• 50180hex C404 Incorrect data received from primary drive mode selector
• 50242hex C442 Incorrect data received from the engine management system via CAN1
• 50578hex C592 Incorrect data received from secondary drive mode selector
• 74240hex 012200 Accelerator pedal sensor
• 74496hex 012300 Accelerator pedal sensor
• 137216hex 021800 Gearbox oil
• 352768hex 056200 Low system voltage
• 393216hex 060000 Transmission control module, internal fault
• 393728hex 060200 The control unit is not programmed
• 393984hex 060300 Transmission control module, internal memory fault
• 394240hex 060400 Control module for RAM memory
• 395008hex 060700 Performance control module
• 396288hex 060C00 Transmission control module, internal communication error
• 397312hex 061000 Gearbox identification
• 398080hex 061300 Resetting the control unit processor
• 398336hex 061400 Fault on torque limiter between engine and gearbox
• 406528hex 063400 Internal control unit temperature too high
• 409088hex 063E00 Accelerator signal missing in auto configuration
• 409344hex 063F00 Coolant temperature signal missing in auto configuration
• 410112hex 064200 Low reference voltage on the sensor circuit
• 410368hex 064300 High reference voltage on the sensor circuit
• 414208hex 065200 Transmission control module, incorrect voltage supply to sensor
• 415488hex 065700 Supply voltage to actuator interrupted
• 415744hex 065800 Supply voltage too low from actuator 1
• 416000hex 065900 Supply voltage too high from actuator 1
• 419584hex 066700 Internal temperature sensor in the control unit, performance
• 419840hex 066800 Internal temperature sensor in the control unit, voltage low
• 420096hex 066900 Internal temperature sensor in the control unit, voltage high
• 459008hex 070100 Control system performance
• 459264hex 070200 Control system, gearbox identification
• 459520hex 070300 Brake switch, circuit fault
• 460800hex 070800 Gear range sensor, voltage high
• 461824hex 070C00 Oil level sensor, voltage low
• 462080hex 070D00 Oil level sensor, voltage high
• 462592hex 070F00 Transmission oil level low
• 463104hex 071100 Oil temperature sensor, unreasonably fast voltage changes
• 463360hex 071200 Oil temperature sensor, voltage low
• 463616hex 071300 Oil temperature sensor, voltage high
• 464128hex 071500 Short circuit in the turbine rotational speed sensor.
• 464384hex 071600 Turbine speed sensor, voltage interference
• 464640hex 071700 Turbine speed sensor, no signal