Scania OPC fault codes
All 197 Scania OPC (Opticruise gearbox control) diagnostic trouble codes, with meaning, causes and how to fix them.
Control units:
OPC4OPC5 (OPC5 ECA)
Showing 181–197 of 197 codes
- 57368hex E018 Fault in the software for the inverter E82 (MGU)
- 57369hex E019 Pre-charging the inverter E82 (MGU) failed
- 57370hex E01A Implausible torque from the inverter E82 (MGU)
- 57371hex E01B Incorrectly connected position sensor for electric machine
- 57372hex E01C Parameters set incorrectly
- 57376hex E020 Fault in the heater for the propulsion battery cooling circuit
- 65410hex FF82 CAN message for engine speed from EMS
- 65411hex FF83 CAN message for propeller shaft speed from TCO
- 65412hex FF84 CAN message for front axle speed from BMS
- 65413hex FF85 CAN message requested gear
- 65414hex FF86 CAN message for clutch pedal position
- 65415hex FF87 CAN message for mode in transfer gearbox
- 65416hex FF88 CAN message for programmed maximum speed
- 65417hex FF89 CAN message for current engine torque
- 65424hex FF90 Gearbox oil temperature
- 65425hex FF91 Engine torque
- 65500hex FFDC CAN message for ABS