Variant 1: Communication with the air processing system (APS)
Applies to: ICL3 (ICL)
What does Scania ICL fault code 769 mean?
What causes Scania DTC 769?
How does the system react?
How to fix Scania ICL fault code 769?
Read the full explanation with Premium
Causes, system reaction, symptoms and step-by-step repair instructions for every fault code are available to Premium members.
- Full explanations of every code and brand
- Causes, symptoms and repair steps
- New brands and codes included
Yearly plan: pay 10 months, get 12. Cancel at any time.
Variant 2
Applies to: ICL2
Variant 3: Communication with the air processing system (APS)
Applies to: ICL3
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 769 in other Scania systems
- 769hex 000301 External amplifier, the CAN bus is off
- 769hex 0301 No CAN1 communication
- 769hex 0301 Engine start switch signal
- 769hex 0301 Air suspension remote control 2
- 769hex 0301 Communication with main control unit for main body system (MBS Master)
- 769hex 000301 APS control system, no CAN communication
- 769hex 0301 Cylinder 1 Misfire Detected
- 769hex 0301 Cylinder 1 Misfire Detected
- 769hex 0301 Cylinder 1 Misfire Detected
- 769hex 0301 Misfiring in cylinder 1
- 769hex 0301 System time
- 769hex 0301 Sensor for front left-hand hatch, open circuit
- 769hex 000301 CAN message missing
- 769hex 0301 No contact with the GPS antenna
- 769hex 0301 No contact with the GPS antenna
- 769hex 0301 TCC control unit, missing CAN message from MBS master control unit
- 769hex 0301 Internal fault