Applies to: ICL1
What does Scania ICL fault code 7 mean?
What causes Scania DTC 7?
How to fix Scania ICL fault code 7?
Read the full explanation with Premium
Causes, system reaction, symptoms and step-by-step repair instructions for every fault code are available to Premium members.
- Full explanations of every code and brand
- Causes, symptoms and repair steps
- New brands and codes included
Yearly plan: pay 10 months, get 12. Cancel at any time.
This information is for guidance only. Always follow the manufacturer workshop manual and safety procedures; if in doubt, contact an authorised workshop.
Code 7 in other Scania systems
- 7hex 0007 Communication between the ACS control units
- 7hex 000007 Loudspeaker channel 3, short circuit to battery voltage
- 7hex 0007 Fel på det inbyggda flashminnet i styrenheten.
- 7hex 0007 Communication on the yellow CAN bus
- 7hex 0007 Communication with the tachograph
- 7hex 0007 Auxiliary heater
- 7hex 0007 Communication with the CUV control unit
- 7hex 0007 Switch on the operation unit
- 7hex 0007 Switch for the alarm
- 7hex 000007 LED-lamp, open circuit
- 7hex 0007 Control unit
- 7hex 0007 Control unit
- 7hex 0007 Control unit
- 7hex 0007 Voltage supply
- 7hex 0007 Rotational speed sensor
- 7hex 0007 Direction indicator rear right.