Scania fault code 912
Code 912 is used by 5 different Scania systems. Choose the control unit shown in your diagnostic tool:
EMS Engine Management System
Exhaust gas temperature sensor T217, short circuit to earth
The control unit interprets that the exhaust gas temperature sensor has a short circuit to earth.
Read explanation →
VDT
Internal fault
Invalid configuration.
Read explanation →
COO Coordinator
No signal from switch, autohold
It was not possible to activate the autohold function via the switch.
Read explanation →
MBS
Fresh air damper for primary roof unit in the right-hand roof area, short circuit
The MBS control unit has detected that the voltage to the fresh air damper for the primary roof unit in the right-hand roof area is outside the valid interval.
Read explanation →
PCS
CAN Checksum Error in message TSC1_10_B_E from BRA
Checksum calculation on message reception.
Read explanation →