Scania fault code 872
Code 872 is used by 5 different Scania systems. Choose the control unit shown in your diagnostic tool:
BMU Battery Management Unit
Battery module 4 in propulsion battery, internal fault
Battery module 4 reports internal failure.
Read explanation →
VDT
Input signal
Invalid configuration.
Read explanation →
COO Coordinator
Green CAN bus
All communication on the green CAN bus is interrupted.
Read explanation →
MBS
#Not implemented. Open load on compressor safety loop supply secondary
Passenger area cooling is not functional.
Read explanation →
DAS
CAN bus for short-range radar, left-hand
All communication on the CAN bus has been interrupted.
Read explanation →