Scania fault code 840

BMU Battery Management Unit Propulsion battery cooling system, emergency stop Extreme temperatures in the propulsion battery or propulsion battery heater which do not decrease after a few minutes. The vehicle is shut down to avoid heat damage. Read explanation → VDT Connections to the gearbox control unit Connectors A and B in the gearbox control unit are disconnected. Read explanation → COO Coordinator CAN communication with switch module Fault in communication with the switch module. Read explanation → MBS Secondary temperature sensor for passenger area, implausible value The secondary temperature sensor for the passenger area displays an implausible value. Read explanation → CMS Solenoid valve type 3/2 for tag axle lift, short circuit to earth Solenoid valve type 3/2 for tag axle lift, PWM output 6 (pin A30), is short-circuited to earth. Read explanation → DCC Internal fault in the direct current converter Incorrect temperature signal internally in the direct current converter. Read explanation →