Scania fault code 803

BMU Battery Management Unit The propulsion battery level monitor T181 indicates a low fluid level. Low coolant level in the propulsion battery cooling system. Signal from the level monitor. Read explanation → COO Coordinator Power steering circuit 2 The flow in power steering circuit 2 has been implausible in relation to the vehicle speed. Read explanation → MBS #Not implemented. Electric compressor high temperature Electric compressor does not run when expected Read explanation → ELC Electronically controlled air suspension Control box 2 The voltage on the input from the control box has been too high. Read explanation → DDU Missing CAN-messages from CID No CAN message recieved from Centre Information Display (CID1) Only stored when ignition is ON. Read explanation → CMS Longitudinal differential lock solenoid valve, double-drive bogie Overload on the output to the solenoid valve. Read explanation → DCU Door control unit, potentiometer rear door leaves, voltage outside valid range The door control unit has detected that the voltage at the input (CN3-10) is outside the valid voltage range 0.8-10.6 V Read explanation →