Scania fault code 785

BMU Battery Management Unit Coolant pump (M86), CAN communication fault CAN message from coolant pump has not been sent. Read explanation → COO Coordinator Switch, vehicle rear level adjustment All communication on the CAN bus for camera and short-range radar is interrupted. Read explanation → MBS Sensor for upper rear engine compartment door, open circuit The voltage supply to the control unit input for the rear upper engine compartment hatch sensor is 12 V. This indicates an open circuit. Read explanation → PCS CAN timeout The sequence check does not match the number of messages received. Read explanation → ICL Instrument Cluster Communication with the visibility system (VIS) No CAN messages from the visibility system's CUV control unit. Read explanation → CMS Electrohydraulic power steering pump The electrohydraulic power steering pump (EHS) indicates reduced functionality. Read explanation → DCU Micro switch rear door leaf, open circuit in closed position The measured voltage on the 3-phase input indicates an open circuit. This occurs when the voltage is approximately 8 – 16 V with a voltage supply of 24 V to the door control unit. Read explanation →