Scania fault code 630

EMS Engine Management System Injector, cylinder 6 Short-circuited to ground. Read explanation → BMU Battery Management Unit Poor temperature balance in propulsion battery Significant difference between the temperature of the battery modules in the propulsion battery. - The maximum permissible temperature difference is 15°C. Read explanation → VDT Internal fault Implausible message via CAN. Read explanation → MBS Collision detector, short circuit Short circuit to voltage supply or earth has been detected in the pin for the collision detector. The voltage is outside the limit value. Read explanation → CUV Visibility system Main beam, right-hand side Fault in the temperature sensor for main beam in the right-hand headlamp. Read explanation → BCI Brake pedal, CAN communication fault Faulty information regarding the brake pedal. Read explanation → CMS Switch, vehicle front level adjustment The signal from the instrument panel switch for front vehicle level adjustment is implausible. The signal has been active for more than 180 seconds. Read explanation → EST Hydraulic fluid grade The piston position sensor movement does not match the motor pump unit speed. Read explanation → ESTA Hydraulic fluid grade The piston position sensor movement does not match the motor pump unit speed. Read explanation →