Scania fault code 611

EMS Engine Management System Cylinder balancing (min or max), cylinder 1 The cylinder balancing values have reached their maximum or minimum permissible limit. Read explanation → EMD Cylinder balancing (min or max), cylinder 1 The cylinder balancing values have reached their maximum or minimum permissible limit. Read explanation → EME Cylinder balancing (min or max), cylinder 1 The cylinder balancing values have reached their maximum or minimum permissible limit. Read explanation → EMO Cylinder 1 balancing min or max. The cylinder balancing compensation value has reached the minimum or maximum value for the cylinder. It is not possible to adjust the balancing value any further. The test is only… Read explanation → VDT Internal fault Implausible message via CAN. Read explanation → COO Coordinator ED1 power take-off The voltage in the solenoid valve circuit for the ED1 gearbox-driven power take-off is low even though the output is activated. Read explanation → CUV Visibility system LIN communication Communication fault in the LIN bus. Read explanation → ACS Articulation Control System Angle sensor Short circuit to supply voltage in the angle sensor circuit. Read explanation → EST CAN message from tachograph The CAN message from the tachograph relating to vehicle speed contains errors. Read explanation → ESTA CAN message from tachograph The CAN message from the tachograph relating to vehicle speed contains errors. Read explanation →