Scania fault code 599

VDT Invalid CAN message Brake pedal position is incorrect. Read explanation → COO Coordinator Green CAN bus All communication on the green CAN bus has been interrupted. Read explanation → CUV Visibility system Cornering lamp, right-hand side Current consumption on the control unit output for the cornering lamp control signal has exceeded 5 A for one second. Read explanation → BCI Short circuit, C259-16 Short circuit to supply voltage (+24 V) or reference voltage (+5 V). Read explanation → ALM Micro switch extra sensor 3 (truck)/micro switch E3 (bus), open circuit or short circuit The micro switch has an open circuit or is short-circuited to the voltage supply. Read explanation → DAS CAN bus for short-range radar, left-hand All communication on the CAN bus has been interrupted. Read explanation → EST Motor pump unit The motor pump is not regulating according to the request from the control unit. The reported value for engine speed differs from the requested value. Read explanation → ESTA No CAN message There is no CAN message from the suspension management system. Read explanation →