Scania fault code 57344

Code 57344 is used by 3 different Scania systems. Choose the control unit shown in your diagnostic tool:

EMS Engine Management System Control unit The DTC is set when the Safety monitor for indicated torque failed Read explanation → TMS Transmission Management System CAN messages from BMU (E81) timed out CAN messages from BMU on HEV-CAN timed out. The fault code is generated if CAN messages from BMU are missing more than 5 times in the transmission frequency. Read explanation → OPC Opticruise gearbox control CAN messages from BMU (E81) timed out CAN messages from BMU on HEV-CAN timed out. The fault code is generated if CAN messages from BMU are missing more than 5 times in the transmission frequency. Read explanation →