Scania fault code 563

BMU Battery Management Unit CAN messages missing from RES sub data bus. CAN messages from the RES sub data bus have failed to arrive. Read explanation → VDT CAN bus Fault in CAN messages for low idling. Read explanation → COO Coordinator Communication with the BWS control unit Communication between the coordinator and the bodywork control unit has been interrupted. Read explanation → MBS MBS expansion unit J, fault in CAN communication CAN communication with MBS expansion unit J interrupted or missing. Read explanation → CUV Visibility system Horn Current consumption on the control unit output has fallen below 0.5 A for five seconds. Read explanation → BCI Short circuit, C259-11 Short circuit to supply voltage (+24 V) or reference voltage (+5 V). Read explanation → ACS Articulation Control System CAN communication with the transmission management system (TMS) No CAN message from the TMS control unit. Read explanation → EST Control unit The fault code is activated when the control unit discovers one of the following during a check: - Incorrect values or signals. - Implausible control, e.g. activation at too high a… Read explanation → ESTA Control unit The fault code is activated when the control unit discovers one of the following during a check: - Incorrect values or signals. - Implausible control, e.g. activation at too high a… Read explanation → ACSX CAN communication with the transmission management system (TMS) No CAN message from the TMS control unit. Read explanation →