Scania fault code 4432

EMS Engine Management System Injector, cylinder 1 The oil temperature sensor detects that the temperature downstream of the radiator is too high compared to the reference value from the exhaust gas aftertreatment system when the e… Read explanation → EMD Injector, cylinder 1 Permanent electrical fault in the injector solenoid valve or in the electrical cables to the injector. The fault only occurs when the engine is running. Read explanation → EME Injector, cylinder 1 Permanent electrical fault in the injector solenoid valve or in the electrical cables to the injector. The fault only occurs when the engine is running. Read explanation → EMO Injection error, physical cylinder 1 Permanent electrical fault detected on the injector coil(s) or the cabling to the injector(s).The fault is detected only when engine is running. Read explanation → AMS Communication error, calculated temperature upstream of SCR catalytic converter intake from EMS The EEC control unit has detected an error in the CAN communication from EMS regarding the calculated temperature upstream of the SCR catalytic converter intake (at the silencer). Read explanation → GSC Fuel level sensor Voltage too low. Read explanation →