Scania fault code 4096

EMS Engine Management System Engine speed The engine speed has been above the permitted level. Read explanation → EMU Temperature sensor T273, battery circuit 1, short circuit to earth The control unit gives an implausibly low voltage on the input signal, which indicates a short circuit to earth. Read explanation → BMU Battery Management Unit Voltage supply to the BMU control unit is below minimum level The voltage supply to the BMU control unit is below the minimum permitted value, 14 V. Read explanation → COO Coordinator Throttle control sensor The voltage in the throttle control sensor circuit has either been above or below the permitted level. The fault code is generated: - if the supply voltage to the sensor has fallen… Read explanation → MGU Torque control of the electric machine The control unit has detected a fault in the electric machine torque control. The electric machine torque from the inverter does not follow the requested torque. Read explanation → PCS Parasitic losses of ICE erroneous signal PCS has detected an erroneous value of Parasitic losses reported by ICE on CAN4. Read explanation → ICL Instrument Cluster General function indication, alarm Fault in the driver or the indication's LED-lamp. Read explanation →