Scania fault code 1842

MBS MBS expansion unit B, power supply pin group V3, current above limit value MBS expansion unit B, current to the pin for power supply pin group V3 has exceeded the limit value of 20 A for more than 5 seconds. Read explanation → ALLISON Allison automatic gearbox Incorrect gear ratio on 2nd gear Actual 2nd gear ratio does not agree with the calculated 2nd gear ratio. Gear ratio is determined on the basis of turbine speed and output shaft speed. This measured gear ratio is… Read explanation → CID Voltage feed Too low a supply voltage to the interactive centre information display detected. Read explanation → DD Voltage feed Too low a voltage supply to the interactive driver display detected. Read explanation →