Scania fault code 1792

TMS Transmission Management System Layshaft brake, poor performance The braking capacity is significantly lower than normal. Read explanation → MBS MBS control unit, current above limit value The MBS control unit has detected that the current to and from the MBS control unit has exceeded the following limit values for more than 5 seconds: Power supply pin group V1: 20 A… Read explanation → MGU Inverter cooling system, overheating The inverter driver stage is deactivated due to the inverter overheating. Read explanation → ICL Instrument Cluster Supply voltage, low Internal fault when starting up the control unit. Read explanation → SC Print-out No print-outs can be produced. The tachograph display shows code 11 for this fault code. Read explanation → DCU Door control unit, current above limit value The door control unit has detected that the total current, which is drained from all door control unit outputs on the low side, has exceeded the limit of 18 A for more than 5 s. Read explanation →