Scania fault code 1058
Code 1058 is used by 6 different Scania systems. Choose the control unit shown in your diagnostic tool:
BMU Battery Management Unit
Cooling circuit for the on-board charger
- The control unit has gauged that the coolant pump has reported a fault. - The coolant level in the cooling circuit is too low.
Read explanation →
VDT
Internal fault
Invalid value for the drive mode selector production date.
Read explanation →
COO Coordinator
Wrong chassis serial number, ACU control unit B
The chassis serial number from ACU control unit B is not the same as the chassis serial number in the coordinator.
Read explanation →
MBS
To be removed
Read explanation →
DAS
Short-range radar, right-hand side
The short-range radar system reports limited functionality or that a significant signal is sent with unsatisfactory status when the vehicle is in motion.
Read explanation →
TCC
Electric heater in the toilet cabin, short circuit
The control unit has interpreted that a short circuit is present in the circuit for the electric heater in the toilet cabin wall.
Read explanation →